Advanced
Email: debben1@aol.com
Tel: 01425 474628
Tel Overseas: 0044 1425 474628
Race Parts
>
Electronics
Dyna shift light
The Dyna Shift Minder System is the ultimate in racing shift light products. The Shift Minder System consists of an attractive billet aluminum Shift Light and the Shift Minder Control Module. This Dyna Shift Light is machined from billet aluminum with an attractive black and gold anodized finish contribute to a custom rugged appearance. The Dyna Shift Light is track proven to be the most reliable. Repeated track testing on Pro Stock drag vehicles has proven the Dyna Shift Light to be capable of withstanding the rigors of racing. To complete the Dyna Shift Minder System you will also need the Dyna Shift Minder as featured below. See also led conversion above.
Price: £48.99
(Excluding: VAT at 17.5%)
Led shift light conversion
This led shift light fits into dyna shift light to replace the dyna shift light bulb, so no more blown shift light bulbs, on top of that this lamp has 2 sets of led light, connect the red wire for the red leds to light or the green wire to light the green leds, you could also use both wires to use both sets of lights, so that red could be used for the shift light and green could be used when the nitrous is activated, or green for a top gear indicator.
click here for fitting instructions
Price: £13.95
(Excluding: VAT at 17.5%)
Dyna shift minder
The Dyna Shift Light is activated by the Dyna Shift Minder, which is a small electronic box which monitors the engine rpm in order to trigger the shift light at precisely the right time. The Shift Minder Control Module has been designed with extremely accurate circuitry to insure triggering accuracy to better than 1%. The Shift Minder Control Module is adjustable to switch at any of 64 different RPM settings with a 125 rpm increment between settings. The Shift Minder Control Module is self contained and requires no additional parts for rpm switch point selection. Can be used to activate other devices besides the Shift Light. For instance the Shift Minder output can be hooked to an air shifter solenoid for automatic shifting at a preset rpm. The Control Module could also be used as an rpm activated switch to turn on a nitrous injection system, activate a high speed fuel system circuit or any other rpm controlled function. Choose from 2 or 4 cylinder applications.
Click here to download intallation instructions
Price: £84.99
(Excluding: VAT at 17.5%)
2 or 4 cylinder
2 cylinder type, DSM-2
4 cylinder type, DSM-4
Dyna rev limiter
Over reving due to a missed gear change is often the cause of an engine failure. The Dyna Rev Limiter will prevent your engine exceeding a pre determined rpm, you choose what the maximum rpm is simply by adjusting a dial on the side of the DRL300 unit, continously adjustable from 6000 - 12000rpm, the DRL300 is prewire and very easy to install, Suitable for CDI or inductive igntion sytems such as the Dyna S.
Click here to download intallation instructions
Price: £102.35
(Excluding: VAT at 17.5%)
Ignition type
Inductive / Dyna S, DRL300
Magneto / CDI, DRL300CDI
Dyna Ignition coils
These high tech, top quality coils are designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. DYNA Coils are made to replace stock coils. Choose from four variations of resistance for different applications. DYNA Coils work with point ignitions or aftermarket electronic ignitions, Sold as a pair. Dual output.
Price: £103.91
(Excluding: VAT at 17.5%)
Primary resistance (Ohm rating)
1.5 ohms, DC2-1
2.2 ohms, DC4-1
3 ohms, DC1-1
5 ohms, DC8-1
Dyna wires, DW800
Set of 8mm Dyna Hi-Performance plug wires with coil boots and terminals, leads are made from a conductive Silicone core with silicone jacket, Grey.
Price: £18.75
(Excluding: VAT at 17.5%)
MPS sport bike engine kill
These Sport Bike Electronic Engine Kills were designed specifically for sequential firing 4 coil ignition systems like those found on most sport bikes today such as the Blackbird, Hayabusa, GSXR1000, ZX12R. The kill time adjustment is set through the access hole in the top cover. Set time is from 50 milliseconds to 100 milliseconds. Required when fitting an airshifter.
Click here to download installation intructions
Price: £125.00
(Excluding: VAT at 17.5%)
Lanyard kill switch, KS78
The lanyard kill switch is now a requirement for scrutineering in 9.50, and all other ACU classes. Available in black only.
Price: £42.95
(Excluding: VAT at 17.5%)
Switched clutch lever, 46076
Clutch lever and pivot with quick adjustment ratchet clutch cable adjuster, built in micro swith to connect to 2 step, flush fit pivot bolt, 2 bolt pivot mount for quick fit and removal.
Price: £40.39
(Excluding: VAT at 17.5%)
Hydraulic switch, 44-719
Hydraulic bolt in brake light switch, a very simple solution to instaling a brake light switch or clutch switch, replaces the banjo bolt at the master cylinder. Avaialble in 10 x 1.00mm thread pitch for most Suzuki's and Brembo or in the 10 x 1.25mm thread pitch.
Price: £14.95
(Excluding: VAT at 17.5%)
Thread size
10 x 1.00mm
10 x 1.25mm
The following text will not be seen after you upload your website, please keep it in order to retain your counter functionality
An insurance policy from the Phoenix will last forever. also one should note that
home insurance
is important for many other reasons not to be specified here. Get your insurance quotes from a reliable agent or broker.
my space count
