Hornet 600

Quick Search:

Honda:Hornet 600


	Camchain tensioner, HT900 The oem stock tensoiner is spring loaded so that it is maintance free, the disadvantage with this compromise is that it can back off if used in a race engine or the engine is used aggressively such as a track day or on the drag strip. Stock tensioners also preload the camchain and tensoiner wheels, this results in accelerated wear. This is why most race/trackday bikes have the manual billet tensoiner fitted, it can not back off and so reliability is not an issue, another reason engine tuners fit this piece is because it does not preload the chain and so friction/wear is reduced, and power is increased. Price: £42.25 (Excluding: VAT at 15%)


Gasket for HT900, EC388 We kept getting asked if we could supply the gasket to go with the camchain tensioners featured above, well now we can. Price: £1.95 (Excluding: VAT at 15%)


	Ignition advancer, RTR HON 8-04 Manufactures ignition timing is set conservatively to allow for differences in octane levels, altitudes, and operating loads, we do not have to worry about low octane fuel or touring around the World, an so by advancing the ignition timing we are normally able to increase power, especially at mid rpm. Easy to fit, simple bolt on power modification. Price: £48.95 (Excluding: VAT at 15%)


K & N replacement airfilter, HA-6098 K&N’s lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. Simply remove the disposable air filter and replace it with a K&N; there is NEVER any cutting or fitting required. The stock replacement air filters for street vehicles are covered by the famous K&N Million-Mile Limited Warranty. Price: £35.76 (Excluding: VAT at 15%)


	Dynojet kit Whether you run a standard motorcycle, or a tuned sportbike, Dynojet carburettor kits can provide you with a simple and affordable solution to all your carburation problems. Each Dynojet Jet Kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time. To find out more about the benefits of the Dynojet kit, click the more info button. Price: £90.89 (Excluding: VAT at 15%)
	Model (Year)

98-02 Chrome oil filter, HF303C Chrome Hiflo oil filter, passes all OEM pressure drop tests, tested and used by some of the fastest teams in the World. Easy way to improve and brighten up the looks of your bike too. Price: £6.81 (Excluding: VAT at 15%)


	Samco hose kit, HON-3 The Samco Sport hose kits are designed to replace original equipment in a wide range of performance vehicles, both in motorsport and fast road use. These have been very popular for many years with car builders and are now available for certain motorcycles. We can supply these in gloss red or gloss blue or they can be made to order in green, yellow, purple, orange or black (special order allow 4-6 wks). Replacing those dirty dull rubber hoses with these glossy silicon Samco hoses also improves the cooling efficiency. Kit total 3 hoses. Price: £46.00 (Excluding: VAT at 15%)


Heavy duty clutch spring set, CSK45 Clutch springs like any coil spring under constant pressure gets weaker with age, as clutch springs get older they loose presure over the clutch plates and lead to clutch slip. These clutch springs give an additional 10% pressure over the original stock springs. Price: £12.50 (Excluding: VAT at 15%)


	Clutch plate set, CP1206 Set of Heavy duty clutch plates that have been tested and proven on some of the fastest drag bikes in Europe, these are manufactured from a cork based material similar to the original equipment and we recommend that they are soaked in oil before installation. Price: £41.31 (Excluding: VAT at 15%)


Lightweight anodised rear sprocket Horsepower measured at the rear wheel is about 15% less than what would be measured at the crankshaft, this is due to power being lost through transmission, chain, sprockets, vibration and moving a large mass like the rear wheel. These anodised alloy sprockets reduce the weight of the rear wheel by up to 2kg. Steel sprockets do not run completely true due to being stamped out, these alloy sprockets are cnc machined which results in a better fit on the wheel and less run out. Anodising will harden the sprocket and look better than black/rusty steel sprockets. Available in your choice and in Red, Blue, Gold, Black or plain Silver. (Not all sizes, amount of teeth are available for all models, if this is the case you will be notified by email) Supplied in 530 pitch unless you state otherwise. Please note anodising normally takes 4-5 days. Price: £39.00 (Excluding: VAT at 15%)
Gearing Colour

	Tsubaki X-ring gold chain, 530 price per link, 530SGX This Tsubaki X ring chain offers reduced friction over the O ring chains, O ring chains are not used on race bikes because of the power robbing friction, with the X ring chain you get the long life advantages of an O ring without the friction. A High viscosity grease is vacuum injected internally to dissipate heat and shock load. Sigma series chains feature superior durability and strength that has been tested and proven on race tracks all over the world, Sigma's heavy duty construction gives it exceptional strength and wear resistance, making it the chain of choice for endurance road racing champions. The Sigma series chains feature gold side plates, so if you are looking for a strong, long lasting good looking 530 pitch high performance street bike chain, this is the one. Price is per link, so for a 96 link length chain you will need to input a quantity of "96". Price: £0.74 (Excluding: VAT at 15%)


Steering bearing set, SSH1903-A Bad handling is often a result of worn head race bearings, as it is as much work to grease the bearings as it is to replace them, they are often neglected at service intervals. Bad road surfaces and wheelies will result in accelerated wear in the bearings. To check your bearings lift the bike so that the front forks and wheel are free to rotate, if there is a"dead spot" or notch when the forks are gently turned either side of straight ahead, your bearings need replacing. Price: £18.40 (Excluding: VAT at 15%)

Honda:Hornet 600