ZX10R

Quick Search:

Kawasaki:ZX10R


	Camchain tensioner KTZX10 The oem stock tensoiner is spring loaded so that it is maintance free, the disadvantage with this compromise is that it can back off if used in a race engine or the engine is used aggressively such as a track day or on the drag strip. Stock tensioners also preload the camchain and tensoiner wheels, this results in accelerated wear. This is why most race/trackday bikes have the manual billet tensoiner fitted, it can not back off and so reliability is not an issue, another reason engine tuners fit this piece is because it does not preload the chain and so friction/wear is reduced, and power is increased. Price: £42.25 (Excluding: VAT at 17.5%)


Reed chamber block off plates , PVBZX10 These reed chamber covers for the ZX10R and ZZR1400 replace the ugly stock caps. They are fully cnc-machined from billet 6061 aluminum and feature the hallmark "ZX" engraved in the top. Bolt holes are recessed so bolt heads are flush with the top of the cap. The kit comes with both caps and four bright mounting bolts. Uses stock reed-valve assembly for sealing - no gasket necessary. Fits ZX10R 04-06 and ZZR1400 Price: £26.95 (Excluding: VAT at 17.5%)


	K & N replacement airfilter, KA1004 K&N’s lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. Simply remove the disposable air filter and replace it with a K&N; there is NEVER any cutting or fitting required. The stock replacement air filters for street vehicles are covered by the famous K&N Million-Mile Limited Warranty. Price: £27.05 (Excluding: VAT at 17.5%)


Dynojet Power Commander Dynojet's Power Commander series represents breakthrough technology for motorcycles with original equipment (OEM) fuel injection. Each unit is supplied with a specific map, designed to improve performance over stock. In addition, several maps for alternate tuning packages are included on disk and can be downloaded into the Power Commander module via a PC computer. The Power Commander includes a PC link cable and software package which allows you to fully map the fuel and ignition curves on your PC computer. If no PC computer is available, the fuel curve can be adjusted using three touch buttons on the face plate. Price: £228.00 (Excluding: VAT at 17.5%)
Model (Year)

	Samco hose kit for 04-05, KAW-8 The Samco Sport hose kits are designed to replace original equipment in a wide range of performance vehicles, both in motorsport and fast road use. These have been very popular for many years with car builders and are now available for certain motorcycles. We can supply these in gloss green or gloss blue or they can be made to order in red, yellow, purple, orange or black (special order allow 4-6 wks). Replacing those dirty dull rubber hoses with these glossy silicon Samco hoses also improves the cooling efficiency. Kit total 9 hoses. Fits 04-05 only Price: £127.68 (Excluding: VAT at 17.5%)


Samco hose kit for 06-07, KAW-13 The Samco Sport hose kits are designed to replace original equipment in a wide range of performance vehicles, both in motorsport and fast road use. These have been very popular for many years with car builders and are now available for certain motorcycles. We can supply these in gloss green or gloss blue or they can be made to order in red, yellow, purple, orange or black (special order allow 4-6 wks). Replacing those dirty dull rubber hoses with these glossy silicon Samco hoses also improves the cooling efficiency. Kit total 6 hoses. Fits 06-07 only Price: £93.88 (Excluding: VAT at 17.5%)


	Heavy duty clutch spring set, CSK111 Clutch springs like any coil spring under constant pressure gets weaker with age, as clutch springs get older they loose presure over the clutch plates and lead to clutch slip. These clutch springs give an additional 10% pressure over the original stock springs. Price: £12.50 (Excluding: VAT at 17.5%)


Valve shims Valve shim for the Kawasaki's, choose from the sizes below. Price: £6.13 (Excluding: VAT at 17.5%)
Size

	Clutch plate set, 98-03, CP4510 Set of Heavy duty clutch plates that have been tested and proven on some of the fastest drag bikes in Europe, these are manufactured from a cork based material similar to the original equipment and we recommend that they are soaked in oil before installation. Price: £56.95 (Excluding: VAT at 17.5%)


Lightweight anodised rear sprocket Horsepower measured at the rear wheel is about 15% less than what would be measured at the crankshaft, this is due to power being lost through transmission, chain, sprockets, vibration and moving a large mass like the rear wheel. These anodised alloy sprockets reduce the weight of the rear wheel by up to 2kg. Steel sprockets do not run completely true due to being stamped out, these alloy sprockets are cnc machined which results in a better fit on the wheel and less run out. Anodising will harden the sprocket and look better than black/rusty steel sprockets. Available in your choice and in Red, Blue, Gold, Black or plain Silver. (Not all sizes, amount of teeth are available for all models, if this is the case you will be notified by email) Supplied in 530 pitch unless you state otherwise. Please note anodising normally takes 4-5 days. Price: £39.00 (Excluding: VAT at 17.5%)
Gearing Colour

	Tsubaki X-ring gold chain, 530 price per link, 530SGX This Tsubaki X ring chain offers reduced friction over the O ring chains, O ring chains are not used on race bikes because of the power robbing friction, with the X ring chain you get the long life advantages of an O ring without the friction. A High viscosity grease is vacuum injected internally to dissipate heat and shock load. Sigma series chains feature superior durability and strength that has been tested and proven on race tracks all over the world, Sigma's heavy duty construction gives it exceptional strength and wear resistance, making it the chain of choice for endurance road racing champions. The Sigma series chains feature gold side plates, so if you are looking for a strong, long lasting good looking 530 pitch high performance street bike chain, this is the one. Price is per link, so for a 96 link length chain you will need to input a quantity of "96". Price: £0.74 (Excluding: VAT at 17.5%)


Tsubaki 530HQR Super A rugged, solid roller chain for sport and racing applications. Wide link plates and extra heavy through hardened pins provide the ultimate in strength and shock resistance. Precision engineering and advances metallurgy give the 530 HQR an average tensile strength of 10,600 lbs. (4,820 kg). Proven on the track this chain was used to win the AMA Superbike Championship and the NHRA & IDBA Pro-stock Drag Racing Championships. Only available in 150 link length. Price: £121.00 (Excluding: VAT at 17.5%)


	Front wheel bearing / seal kit, BRG2304 Wheel bearings typically fail from dirt and water contamination. These kits include premium EMQ quality KML hi-speed bearings with double lip rubber seals to keep out dirt and water and retain the grease, type TC nitrile elastomer wheel seals have a rubber coated outer and steel garter spring inner to provide constant pressure on the axle shaft and provides further protectoin for the bearings which will extend service life. Price is for the complete set. Price: £8.50 (Excluding: VAT at 17.5%)


Rear wheel bearing / seal kit, BRG2316 Wheel bearings typically fail from dirt and water contamination. These kits include premium EMQ quality KML hi-speed bearings with double lip rubber seals to keep out dirt and water and retain the grease, type TC nitrile elastomer wheel seals have a rubber coated outer and steel garter spring inner to provide constant pressure on the axle shaft and provides further protectoin for the bearings which will extend service life. Price is for the complete set. Price: £11.50 (Excluding: VAT at 17.5%)


	Steering bearing set, SSK1280-A Bad handling is often a result of worn head race bearings, as it is as much work to grease the bearings as it is to replace them, they are often neglected at service intervals. Bad road surfaces and wheelies will result in accelerated wear in the bearings. To check your bearings lift the bike so that the front forks and wheel are free to rotate, if there is a"dead spot" or notch when the forks are gently turned either side of straight ahead, your bearings need replacing. Price: £25.52 (Excluding: VAT at 17.5%)

Kawasaki:ZX10R