www.debben.co.uk ZZR1400

Quick Search:

Kawasaki:ZZR1400


	Camchain tensioner KTZX14 The oem stock tensoiner is spring loaded so that it is maintance free, the disadvantage with this compromise is that it can back off if used in a race engine or the engine is used aggressively such as a track day or on the drag strip. Stock tensioners also preload the camchain and tensoiner wheels, this results in accelerated wear. This is why most race/trackday bikes have the manual billet tensoiner fitted, it can not back off and so reliability is not an issue, another reason engine tuners fit this piece is because it does not preload the chain and so friction/wear is reduced, and power is increased. Price: £42.25 (Excluding: VAT at 17.5%)


Reed chamber block off plates , PVBZX10 These reed chamber covers for the ZX10R and ZZR1400 replace the ugly stock caps. They are fully cnc-machined from billet 6061 aluminum and feature the hallmark "ZX" engraved in the top. Bolt holes are recessed so bolt heads are flush with the top of the cap. The kit comes with both caps and four bright mounting bolts. Uses stock reed-valve assembly for sealing - no gasket necessary. Fits ZX10R 04-06 and ZZR1400 Price: £26.95 (Excluding: VAT at 17.5%)


	Adjustable cam sprockets, ACSZX14 Most riders know that performance camshafts require the correct cam timing to obtain reliability and maximum gain in power, but even stock engines will benifit form precise cam timing, we have found substainal gains in power by degreeing the cams in, many bikes roll off the production line with a stack up of toloerences that lead to the camshafts being several degrees out of the desired position, add camchain stretch, wear on the guides and even more power is lost. These cam sprockets will enable you to degree the camshafts in, they are cnc machined so that they are a precise fit onto the camshafts and are also heat treated for an extra long life. At £43.50 a pair they are perhaps the least expensive gain in power you can buy. To fit 3 bolt cams only. How to degree cams in Price: £43.50 (Excluding: VAT at 17.5%)


APE valve spring set VS1400K A complete valve spring and titanium retainer kit for the Kawasaki ZZR1400. The new APE springs feature increased pressures from seat to max lift and approx .100" more travel than the oem springs. More than enough pressure to control the most aggressive cam lobe designs with the peace of mind that only the dual spring design can offer. The CNC machined retainers features slightly deeper shim bores for maximum shim control. Includes steel spring bases APE valve springs are manufactured using a premium chrome silicon spring steel and are electronically tested for defects, designed to provide maximum control without causing excessive valve seat pressure, for consistant pressure and excellent fatigue life. Racers as well as street riders have come to depend on APE springs for winning performance. For use with high lift cam and / or agressive camshaft profile. Price: £248.00 (Excluding: VAT at 17.5%)


	Clutch plate set, CP4518 Set of Heavy duty clutch plates that have been tested and proven on some of the fastest drag bikes in Europe, these are manufactured from a cork based material similar to the original equipment and we recommend that they are soaked in oil before installation. Price: £53.25 (Excluding: VAT at 17.5%)


Tsubaki X-ring gold chain, 530 price per link, 530SGX This Tsubaki X ring chain offers reduced friction over the O ring chains, O ring chains are not used on race bikes because of the power robbing friction, with the X ring chain you get the long life advantages of an O ring without the friction. A High viscosity grease is vacuum injected internally to dissipate heat and shock load. Sigma series chains feature superior durability and strength that has been tested and proven on race tracks all over the world, Sigma's heavy duty construction gives it exceptional strength and wear resistance, making it the chain of choice for endurance road racing champions. The Sigma series chains feature gold side plates, so if you are looking for a strong, long lasting good looking 530 pitch high performance street bike chain, this is the one. Price is per link, so for a 96 link length chain you will need to input a quantity of "96". Price: £0.74 (Excluding: VAT at 17.5%)


	Tsubaki 530HQR Super A rugged, solid roller chain for sport and racing applications. Wide link plates and extra heavy through hardened pins provide the ultimate in strength and shock resistance. Precision engineering and advances metallurgy give the 530 HQR an average tensile strength of 10,600 lbs. (4,820 kg). Proven on the track this chain was used to win the AMA Superbike Championship and the NHRA & IDBA Pro-stock Drag Racing Championships. Only available in 150 link length. Price: £121.00 (Excluding: VAT at 17.5%)


Lightweight anodised rear sprocket Horsepower measured at the rear wheel is about 15% less than what would be measured at the crankshaft, this is due to power being lost through transmission, chain, sprockets, vibration and moving a large mass like the rear wheel. These anodised alloy sprockets reduce the weight of the rear wheel by up to 2kg. Steel sprockets do not run completely true due to being stamped out, these alloy sprockets are cnc machined which results in a better fit on the wheel and less run out. Anodising will harden the sprocket and look better than black/rusty steel sprockets. Available in your choice and in Red, Blue, Gold, Black or plain Silver. (Not all sizes, amount of teeth are available for all models, if this is the case you will be notified by email) Supplied in 530 pitch unless you state otherwise. Please note anodising normally takes 4-5 days. Price: £39.00 (Excluding: VAT at 17.5%)
Gearing Colour

	Swing arm These model specific braced swing arms have been manufactured to show winning standards and are available in 3 diferent lengths, The 7" arm allows adjustment from 1" longer than standard to 7" longer than standard, the 10" arm allows 4 to 10" over std and the 12" arm from 6 to 12" longer than std, all swing arm comes finished ready to bolt in with needle roller bearings fitted in the swing arm pivot, nylon chain runner guides fitted, billet chain adjusters and heavy duty wheel spindle, a chain guard is included in the price and all arms have a built in air tank and mounting point for a nitrous bottle bracket. Finish is in bare alloy ready for polishing or painting. Price: £695.00 (Excluding: VAT at 17.5%)
	Type

Kawasaki:ZZR1400